1. Increase gasoline octane number

Adding 1/10000 of MMT to gasoline, the content of manganese does not exceed 18mg/L, which can increase the octane number of gasoline by 2 to 3 units.

Improve vehicle driving force and reduce fuel consumption. The engine frame inspection of the Energy Utilization Monitoring Center of the Automobile Transportation Industry of the Department of Transportation concludes that the 90# unleaded gasoline with MMT is compared with the 90# unleaded gasoline U without MMT, and the engine is driven. The force characteristics are improved and the fuel consumption is reduced.

2. Good compatibility with two components of oxygen content such as MTBE and 1 alcohol

MMT, MTBE, and 1 alcohol have relatively good adductivity in improving the octane number, which brings convenience to the manufacture of high-standard automobile U. It can not only meet the higher octane number, but also prevent the vehicle power characteristics from degrading too much due to excessive selection of MTBE, and it can meet the industry standard of "oxygen content less than or equal to 2.7%".

3. Reduce waste discharge in exhaust emissions

Compared with the 90# lead-free steam U with MMT added and the 90# lead-free steam U without additives, the carbon monoxide in the exhaust gas of the engine car is reduced by 17.7%, and the HC is reduced by 18.2%.

4.It has an improved effect on the vehicle exhaust catalytic converter

Phosphorus is an approved catalyst. When MMT is ignited, it can remove phosphorous and reduce the accumulation on the catalyst. Therefore, the use of MMT fuel can increase the life of the catalyst, maintain a high conversion rate of the catalyst, and convert harmful substances more effectively. Reduce waste discharge.

5.Improve the actual operation of oil production

●Reduce the strictness of the actual operation of the reorganization equipment

●Reduce the content of aromatic hydrocarbons in gasoline

●Reduce the content of olefins in gasoline

●Reduce oil demand

6. Improve the flexibility of oil blending operations

The gasoline products of different specifications can be adjusted according to the effective selection of MMT, MTBE, recombined gasoline, catalytic gasoline and straight-run gasoline.

(1) Diluent of MMT: For the higher concentration of MMT, it is necessary to dilute the liquid first and then add it to gasoline. Add MMT and special modifiers to the solvent (such as toluene, mixed xylene, 1 alcohol, solvent oil, Gas U, etc.), under the protection of N2, stir for half an hour to dissolve completely, prepare the MMT solvent, and then add the prepared solvent to the gasoline according to the ratio.

(2) MMT products with lower concentrations can be immediately added to gasoline at a rate.

(3) Addition of MMT products:

7. Addition amount in one ton of steam U per liter of steam U

24.4%102g0.074g

15.1%165g0.119g

Choose 200L galvanized iron drum for outer packaging, with a net weight of 180Kg; other outer packaging types can also be selected according to the real needs of customers.