Chemical Products

Colorless tasteless oily liquid, boiling point 343 ° C (0.101 MP), flash point (open cup) 204 ° C, freezing point -80 ° C, volatile rate 0.00009 g / cm, hour (105 ° C), hydrolysis rate 0.1% (100) ° C, 6 hours), soluble in most organic solvents. Resin compatible with polyvinyl chloride, polystyrene, vinyl chloride-vinyl acetate copolymer, nitrocellulose, ethylcellulose, polyvinyl butyal butyal.
Colorless tasteless oily liquid, boiling point 343 ° C (0.101 MP), flash point (open cup) 204 ° C, freezing point -80 ° C, volatile rate 0.00009 g / cm, hour (105 ° C), hydrolysis rate 0.1% (100) ° C, 6 hours), soluble in most organic solvents. Resin compatible with polyvinyl chloride, polystyrene, vinyl chloride-vinyl acetate copolymer, nitrocellulose, ethylcellulose, polyvinyl butyal butyal.
Contact now
Resin compatible with polyvinyl chloride, polystyrene, vinyl chloride-vinyl acetate copolymer, nitrocellulose, ethylcellulose, polyvinyl butyal butyal. It is compatible with cellulose acetate and phrochloride cellulose. The cold resistance and light resistance of the product are similar to the tributyl citrate, but water resistance is better. Non-toxic, LD50 = 4000 mg / kg.
Resin compatible with polyvinyl chloride, polystyrene, vinyl chloride-vinyl acetate copolymer, nitrocellulose, ethylcellulose, polyvinyl butyal butyal. It is compatible with cellulose acetate and phrochloride cellulose. The cold resistance and light resistance of the product are similar to the tributyl citrate, but water resistance is better. Non-toxic, LD50 = 4000 mg / kg.
Contact now
Appearance and properties: colorless liquid, almost odorless

Molecular weight 90.12 Vapor pressure 0.51 kPa/20℃ Flash point: 43℃

Melting point -70°C boiling point: 135.1°C solubility can be miscible with water and most organic solvents such as ethanol

Density (D4) 0.925-0.935
Appearance and properties: colorless liquid, almost odorless

Molecular weight 90.12 Vapor pressure 0.51 kPa/20℃ Flash point: 43℃

Melting point -70°C boiling point: 135.1°C solubility can be miscible with water and most organic solvents such as ethanol

Density (D4) 0.925-0.935
Contact now
In the textile industry, it is used as a dispersant for fiber lubricants and chemical fiber oils, as well as automotive brake fluids, pesticide dispersants, dry cleaning agents, cutting oil solvents, organic synthesis intermediates, auxiliary solvents for mineral oil emulsions, and analytical reagents.
In the textile industry, it is used as a dispersant for fiber lubricants and chemical fiber oils, as well as automotive brake fluids, pesticide dispersants, dry cleaning agents, cutting oil solvents, organic synthesis intermediates, auxiliary solvents for mineral oil emulsions, and analytical reagents.
Contact now
Melting point -70°C boiling point: 135.1°C solubility can be miscible with water and most organic solvents such as ethanol

Density (D4) 0.925-0.935

The relative density (water=1) is 0.94; the relative density (air=1) 3.10 is stable

Danger marks 7 (flammable liquid) and 14 (including drugs) are mainly used as solvents, as well as leather colorants, emulsifiers, stabilizers, paint thinners, paint removers, etc.
Melting point -70°C boiling point: 135.1°C solubility can be miscible with water and most organic solvents such as ethanol

Density (D4) 0.925-0.935

The relative density (water=1) is 0.94; the relative density (air=1) 3.10 is stable

Danger marks 7 (flammable liquid) and 14 (including drugs) are mainly used as solvents, as well as leather colorants, emulsifiers, stabilizers, paint thinners, paint removers, etc.
Contact now
Appearance: Light yellow to white granular crystals (semi-circular) white to light yellow loose crystals, heating is made black. Microfincture.

Content: ≥ 85%

Melting point: 98-102 ° C

Dry loss: ≤0.2%
Appearance: Light yellow to white granular crystals (semi-circular) white to light yellow loose crystals, heating is made black. Microfincture.

Content: ≥ 85%

Melting point: 98-102 ° C

Dry loss: ≤0.2%
Contact now
1.4, 4 '- methylene bis (2-chlorocene)

The molecular weight is 267.15, the molecular formula is C13H12N2 CL2
1.4, 4 '- methylene bis (2-chlorocene)

The molecular weight is 267.15, the molecular formula is C13H12N2 CL2
Contact now
Product Quality: Chemical Abstracts Number: 101-14-4

Appearance: Light yellow to white granular crystals (semi-circular) white to light yellow loose crystals, heating is made black. Microfincture.

Content: ≥ 85%

Melting point: 98-102 ° C

Dry loss: ≤0.2%
Product Quality: Chemical Abstracts Number: 101-14-4

Appearance: Light yellow to white granular crystals (semi-circular) white to light yellow loose crystals, heating is made black. Microfincture.

Content: ≥ 85%

Melting point: 98-102 ° C

Dry loss: ≤0.2%
Contact now
It is a new solvent for selective desulfurization and decarbonization with excellent performance. It has the advantages of high selectivity, low solvent consumption, significant energy-saving effect, and non-degradability.
It is a new solvent for selective desulfurization and decarbonization with excellent performance. It has the advantages of high selectivity, low solvent consumption, significant energy-saving effect, and non-degradability.
Contact now
The molecular weight is 119.16, the melting point is -21°C, the flash point is 127°C, the freezing point is -21°C, and the refractive index is 1.4678. The viscosity (20°C) is 101 MPa·sec. The latent heat of vaporization is 519.16KJ/Kg. Colorless or light yellow viscous liquid, boiling point 247℃, soluble in water and ethanol, slightly soluble in ether. Flammable. It is non-toxic, LD504780mg/kg. It is a new solvent for selective desulfurization and decarbonization with excellent performance. It has the advantages of high selectivity, low solvent consumption, significant energy-saving effect, and non-degradability.
The molecular weight is 119.16, the melting point is -21°C, the flash point is 127°C, the freezing point is -21°C, and the refractive index is 1.4678. The viscosity (20°C) is 101 MPa·sec. The latent heat of vaporization is 519.16KJ/Kg. Colorless or light yellow viscous liquid, boiling point 247℃, soluble in water and ethanol, slightly soluble in ether. Flammable. It is non-toxic, LD504780mg/kg. It is a new solvent for selective desulfurization and decarbonization with excellent performance. It has the advantages of high selectivity, low solvent consumption, significant energy-saving effect, and non-degradability.
Contact now
Features: Contains two hydroxyl groups and one amino group. Hydroxyl reduces the vapor pressure, increases the solubility, is conducive to the absorption of acid gas, and can increase the concentration, reduce circulation, and reduce energy consumption. The presence of the methyl group in the amino group reduces the alkalinity and activity of the amino group and reduces the CO2 absorption rate.

The molecular weight is 119.16, the melting point is -21°C, the flash point is 127°C, the freezing point is -21°C, and the refractive index is 1.4678. The viscosity (20°C) is 101 MPa·sec. The latent heat of vaporization is 519.16KJ/Kg. Colorless or light yellow viscous liquid, boiling point 247℃, soluble in water and ethanol, slightly soluble in ether. Flammable. It is non-toxic, LD504780mg/kg. It is a new solvent for selective desulfurization and decarbonization with excellent performance. It has the advantages of high selectivity, low solvent consumption, significant energy-saving effect, and non-degradability.
Features: Contains two hydroxyl groups and one amino group. Hydroxyl reduces the vapor pressure, increases the solubility, is conducive to the absorption of acid gas, and can increase the concentration, reduce circulation, and reduce energy consumption. The presence of the methyl group in the amino group reduces the alkalinity and activity of the amino group and reduces the CO2 absorption rate.

The molecular weight is 119.16, the melting point is -21°C, the flash point is 127°C, the freezing point is -21°C, and the refractive index is 1.4678. The viscosity (20°C) is 101 MPa·sec. The latent heat of vaporization is 519.16KJ/Kg. Colorless or light yellow viscous liquid, boiling point 247℃, soluble in water and ethanol, slightly soluble in ether. Flammable. It is non-toxic, LD504780mg/kg. It is a new solvent for selective desulfurization and decarbonization with excellent performance. It has the advantages of high selectivity, low solvent consumption, significant energy-saving effect, and non-degradability.
Contact now
Ricia oil contains a lot of ricic acid (more than 80%), so many unique properties:

1. It is easy to dissolve in ethanol, which is difficult to dissolve in petroleum ether. This feature is more likely to distinguish between castor oil from other grease.

2. The viscosity is much higher than that of the general oil, and 25 is 680 cps, the viscosity index 84, the friction coefficient is very low (0.1).

The fluidity of castor oil is good, and the refined castor oil can still flow in -22.

3. There is a strong optically optically, because its main fatty acid - asymmetric carbon atom in ricin alcohol is 12.

4. The dielectric constant is about 4.30, which is the highest in common oil.

5. The relative density and acetyl value of castor oil are greater than the general oil.

6. Castor oil has almost no oxidative fat in the air, and the stability of storage is a typical inherent liquid oil.
Ricia oil contains a lot of ricic acid (more than 80%), so many unique properties:

1. It is easy to dissolve in ethanol, which is difficult to dissolve in petroleum ether. This feature is more likely to distinguish between castor oil from other grease.

2. The viscosity is much higher than that of the general oil, and 25 is 680 cps, the viscosity index 84, the friction coefficient is very low (0.1).

The fluidity of castor oil is good, and the refined castor oil can still flow in -22.

3. There is a strong optically optically, because its main fatty acid - asymmetric carbon atom in ricin alcohol is 12.

4. The dielectric constant is about 4.30, which is the highest in common oil.

5. The relative density and acetyl value of castor oil are greater than the general oil.

6. Castor oil has almost no oxidative fat in the air, and the stability of storage is a typical inherent liquid oil.
Contact now
Colorless tasteless oily liquid, boiling point 343 ° C (0.101 MP), flash point (open cup) 204 ° C, freezing point -80 ° C, volatile rate 0.00009 g / cm, hour (105 ° C), hydrolysis rate 0.1% (100) ° C, 6 hours), soluble in most organic solvents. Resin compatible with polyvinyl chloride, polystyrene, vinyl chloride-vinyl acetate copolymer, nitrocellulose, ethylcellulose, polyvinyl butyal butyal.
Contact Now
Resin compatible with polyvinyl chloride, polystyrene, vinyl chloride-vinyl acetate copolymer, nitrocellulose, ethylcellulose, polyvinyl butyal butyal. It is compatible with cellulose acetate and phrochloride cellulose. The cold resistance and light resistance of the product are similar to the tributyl citrate, but water resistance is better. Non-toxic, LD50 = 4000 mg / kg.
Contact Now
Appearance and properties: colorless liquid, almost odorless

Molecular weight 90.12 Vapor pressure 0.51 kPa/20℃ Flash point: 43℃

Melting point -70°C boiling point: 135.1°C solubility can be miscible with water and most organic solvents such as ethanol

Density (D4) 0.925-0.935
Contact Now
In the textile industry, it is used as a dispersant for fiber lubricants and chemical fiber oils, as well as automotive brake fluids, pesticide dispersants, dry cleaning agents, cutting oil solvents, organic synthesis intermediates, auxiliary solvents for mineral oil emulsions, and analytical reagents.
Contact Now
Melting point -70°C boiling point: 135.1°C solubility can be miscible with water and most organic solvents such as ethanol

Density (D4) 0.925-0.935

The relative density (water=1) is 0.94; the relative density (air=1) 3.10 is stable

Danger marks 7 (flammable liquid) and 14 (including drugs) are mainly used as solvents, as well as leather colorants, emulsifiers, stabilizers, paint thinners, paint removers, etc.
Contact Now
Appearance: Light yellow to white granular crystals (semi-circular) white to light yellow loose crystals, heating is made black. Microfincture.

Content: ≥ 85%

Melting point: 98-102 ° C

Dry loss: ≤0.2%
Contact Now
1.4, 4 '- methylene bis (2-chlorocene)

The molecular weight is 267.15, the molecular formula is C13H12N2 CL2
Contact Now
Product Quality: Chemical Abstracts Number: 101-14-4

Appearance: Light yellow to white granular crystals (semi-circular) white to light yellow loose crystals, heating is made black. Microfincture.

Content: ≥ 85%

Melting point: 98-102 ° C

Dry loss: ≤0.2%
Contact Now
It is a new solvent for selective desulfurization and decarbonization with excellent performance. It has the advantages of high selectivity, low solvent consumption, significant energy-saving effect, and non-degradability.
Contact Now
The molecular weight is 119.16, the melting point is -21°C, the flash point is 127°C, the freezing point is -21°C, and the refractive index is 1.4678. The viscosity (20°C) is 101 MPa·sec. The latent heat of vaporization is 519.16KJ/Kg. Colorless or light yellow viscous liquid, boiling point 247℃, soluble in water and ethanol, slightly soluble in ether. Flammable. It is non-toxic, LD504780mg/kg. It is a new solvent for selective desulfurization and decarbonization with excellent performance. It has the advantages of high selectivity, low solvent consumption, significant energy-saving effect, and non-degradability.
Contact Now
Features: Contains two hydroxyl groups and one amino group. Hydroxyl reduces the vapor pressure, increases the solubility, is conducive to the absorption of acid gas, and can increase the concentration, reduce circulation, and reduce energy consumption. The presence of the methyl group in the amino group reduces the alkalinity and activity of the amino group and reduces the CO2 absorption rate.

The molecular weight is 119.16, the melting point is -21°C, the flash point is 127°C, the freezing point is -21°C, and the refractive index is 1.4678. The viscosity (20°C) is 101 MPa·sec. The latent heat of vaporization is 519.16KJ/Kg. Colorless or light yellow viscous liquid, boiling point 247℃, soluble in water and ethanol, slightly soluble in ether. Flammable. It is non-toxic, LD504780mg/kg. It is a new solvent for selective desulfurization and decarbonization with excellent performance. It has the advantages of high selectivity, low solvent consumption, significant energy-saving effect, and non-degradability.
Contact Now
Ricia oil contains a lot of ricic acid (more than 80%), so many unique properties:

1. It is easy to dissolve in ethanol, which is difficult to dissolve in petroleum ether. This feature is more likely to distinguish between castor oil from other grease.

2. The viscosity is much higher than that of the general oil, and 25 is 680 cps, the viscosity index 84, the friction coefficient is very low (0.1).

The fluidity of castor oil is good, and the refined castor oil can still flow in -22.

3. There is a strong optically optically, because its main fatty acid - asymmetric carbon atom in ricin alcohol is 12.

4. The dielectric constant is about 4.30, which is the highest in common oil.

5. The relative density and acetyl value of castor oil are greater than the general oil.

6. Castor oil has almost no oxidative fat in the air, and the stability of storage is a typical inherent liquid oil.
Contact Now